Skip to main content
Wake Forest University

Setting up Speed Dial on your Cisco Video Phone

Modified on: Tue, Jul 23, 2019 2:46 PM

Follow these steps to add Speed Dial contacts to your phone screen

  1. Log in at phone.wfu.edu using your regular WFU credentials
  2. Find your video phone under the "My Phones" section
  3. Click the Gear icon and select Settings
  4. Add the phone number, label (this will show up on the phone screen), and speed dial number of your choosing
  5. Click Save and repeat for additional contacts

You can store/program up to 199 speed dials via the Cisco Web Portal, with first 4 speed dials appearing on your phone below your main number. After the available speed dial buttons on the phone are used up, the remaining programmed speed dials can be accessed by following the steps below.

Using Speed Dial on your Cisco phone

  1. Pick up handset and press Abbr dial or Speed dial softkey (depending on your phone model)
  2. Enter the speed dial # (number assigned to speed dial)
  3. Press Abbr dial or Speed dial softkey again to make the call

For example, to access speed dial #5, you would pick up the handset, press Abbr dial or Speed dial softkey, press "5", then press Abbr dial or Speed dial softkey again to place the call.

Was this answer helpful? Yes No

Sorry we couldn't be helpful. Help us improve this article with your feedback.