Cart-Based (Monitor) System

The cart-based (monitor) system consists of a multisync monitor on top of a wooden, lockable cabinet. All of the Monitor systems have a VCR, PC, and Auxillary input. Some units have DVD players installed as well.

Powering On the Monitor

1. Press the On\Off button on front of the monitor. This is a main On\Off switch and will not power the monitor on. A red light should appear if this switch is in the on position.
2. Press the power button on front of the monitor or on the remote control.

Adjusting the Volume

1. The volume can be adjusted by using the volume buttons on the front of the monitor or the buttons on the monitor remote control.

Viewing Cable Television

1. Power on the monitor.
2. Turn the control knob on the side of the cabinet to select VCR.
3. Power on the VCR.
4. Use the channel up\down controls, either on the VCR remote or on front of the VCR, to select desired channel.

Viewing a VHS Tape

1. Power on the monitor.
2. Turn the control knob on the side of the cabinet to select VCR.
3. Power on the VCR.
4. Insert the VHS tape into the VCR.
5. Use the appropriate control, either on the VCR remote or on front of the VCR, such as: Play, Stop, Pause, Fast Forward, and Rewind.

Viewing a DVD\Laser Disc\ or Audio Compact Disc (If system is equipped)

1. Power on the monitor.
2. Turn the control knob on the side of the cabinet to select DISC.
3. Power on the DVD\LD\CD player.
4. Insert the DVD\LD\CD into the player.
5. Use the appropriate control, either on the DVD\LD\CD remote or on front of the DVD\LD\CD, such as: Play, Stop, Pause, Fast Forward, and Rewind.

Viewing a Computer on the Monitor

1. Power on the monitor.
2. Turn the control knob on the side of the cabinet to select PC.
3. Connect the 15-pin cable into the VGA port on the computer. There is only one place it can connect.
4. Press "Fn" and "F7" buttons on the computer simultaneously to toggle between display methods. Note: By pressing "Fn" + "F7" once, the image will appear on the monitor; press "Fn" + "F7" a second time and the image will appear on the monitor and the PC screen; press "Fn" + "F7" a third time and the image will appear on the PC screen only.

Powering Off the Monitor

1. Press the power button on front of the monitor or on the remote control.


Keywords:  Multi-sync monitor, cart based, how-to


11/14/2012

Comments